Re: 1928 Packard 6cylinder

Posted by Owen_Dyneto On 2015/6/2 10:06:37

Well, with no spark at the plugs it's not going to start regardless of what you do with fuel. You need a running engine to provide the vacuum for the S-W tank to refill. The gas that was in it evaporated years ago but you can manually refill the tank to provide a gasoline supply. But you'll need to solve your ignition problem first - I'd start with new (or at least burnished and cleaned) points, new condenser, and do a temporary connection with a known-good ignition coil and power the coil directly to the battery rather than going thru the ignition switch just to eliminate that as a possible issue.