Re: Breakout of K Steering Wheel

Posted by HH56 On 2016/11/3 21:21:52

Excellent and sorely needed. If you redo it will you show or highlight the small locating pin (more of a bump) on the contact plate which goes thru the 4th hole in the gasket and then extends into the locating socket or hole in the hub.

Also, is there any kind of plastic insulator in that locating hole in your hub? Mine did not have one but it had been taken apart and repainted at some point. The diameter of the pin is much smaller than the hole so I thought something should be there. I fit a small plastic ring into the hub hole to keep the pin from touching the sides just in case for whatever reason the plate was able to rotate..