Re: Heater and Defroster installation instructions--1942/46/46 Clipper

Posted by HH56 On 2017/12/1 9:46:34

Not that I have found. The 42 all model diagram has wiring for the special Clipper dash switch used with the Deluxe heater with reversible motor but nothing for the standard install individual units and switches or what Packard called the Dual Stream underseat heater and the Defroster-Footwarmer unit under the dash.

On my what I assume to be stock install the power for the standard units was from the ign sw thru an inline fuse to one switch and a short jumper connected power to the other switch. A single wire from the individual units then went to their respective switches. Dash unit just went up and to the defroster switch, the floor unit had a single wire clamped in a couple of spots running under the front carpet and up behind the left kickpanel and to the heater switch.