Re: 1934 Packard 1101 bumper help
Posted by Richard Lambert On 2019/7/9 11:15:21
FYI;
Here was the problem, they had a chrome plated brass cap epoxied to the 2 3/4" threaded dome that had a 3/8" hex. Had to heat and epoxy let loose.
Could then unthread the inter dome. For the next owner I drilled out the cap so the hex will fit.
Richard
Attach file:
(296.20 KB)
Here was the problem, they had a chrome plated brass cap epoxied to the 2 3/4" threaded dome that had a 3/8" hex. Had to heat and epoxy let loose.
Could then unthread the inter dome. For the next owner I drilled out the cap so the hex will fit.
Richard
Attach file:
(296.20 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=213206