Re: Converting back to six volt
Posted by HH56 On 2024/5/13 13:27:48
I cannot answer the question about getting ground at ign switch but maybe someone else can say if there is a ground terminal on the 41 ign switch or if the ground wire just connects to a dash or body screw that is near the ign switch.
Packard used a couple of versions of the S-W electric wiper. These instructions are for the model 645-A which by the date of the publication and shape of the outside pivot pieces I believe may be applicable to the 41 cars. It just says the wire is grounded and the factory drawing just shows it as being grounded.
Attach file:
stewart elect wipers model 645.pdf Size: 2,308.24 KB; Hits: 27
Packard used a couple of versions of the S-W electric wiper. These instructions are for the model 645-A which by the date of the publication and shape of the outside pivot pieces I believe may be applicable to the 41 cars. It just says the wire is grounded and the factory drawing just shows it as being grounded.
Attach file:
stewart elect wipers model 645.pdf Size: 2,308.24 KB; Hits: 27This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=271519