Re: Converting back to six volt

Posted by Jimmyk On 2024/5/16 12:48:58

Ok thanks…got everything figured out except the panel switch…I have it all wired correct ..it is getting power from the light switch..the only issue is the panel lights and clock light which are all on same wire do not work when pulling the panel switch on ..the reading light which is on a different terminal on the panel switch comes on when pulling to 3rd and last position..this is correct..for some reason I get no voltage to the panel and clock lights when l switch is is pulled on to first or second position…I know the light switch needs to on before the panel switch will operate…when I push the panel switch in all the way to the off position I get the 6 volts to panel lights and clock light but the bulb does not illuminate….assuming the panel switch may be bad? I have not reached up and removed the panel bulbs but assuming they are good….any thoughts? Tks