missing ignition switch?
Posted by Tristar500 On 2024/6/30 13:31:54
My '49 Custom 8 came without the ignition switch and I suspect the previous owner was hot-wiring it to get it to run. There is a wire coming off the coil that goes nowhere. Not sure which terminal on the coil or if that wire would go to the positive or negative battery?
There is also a pair of wires coming off the harness close to the oil pressure sender that I have no idea what they are supposed to go to.
Any help here is greatly appreciated.
Attach file:
PXL_20240630_174928026.jpg (281.82 KB)![226933_6681a475e658f.jpg 809X624 px](https://packardinfo.com/xoops/html/uploads/newbb/thumbs/226933_6681a475e658f.jpg)
PXL_20240630_174939038.jpg (1,056.21 KB)![226933_6681a4956a0a2.jpg 1790X1596 px](https://packardinfo.com/xoops/html/uploads/newbb/thumbs/226933_6681a4956a0a2.jpg)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=273514