Re: Where to find diagram or schematic of 1941 Horn/Steering Parts

Posted by Bill Jones Jr. On 2009/12/3 22:34:30

Mal,

My name is Bill and my sign in name is Willie J so either one works. Thanks for sending the photos. It appears that the small spring is missing from my assembly. Everything else appears to be there. One question I do have is how tight should the three screws that come in from the back of the steering wheel and attach the spoke assembly to the plastic part of the wheel be?

Mine was screwed down so tight that you could not even rock the horn ring assembly. There are two different lengths of screws that hold the horn ring assembly to the steering wheel. One is about 3/8 inch long and the other is about 1/2 inch long. These screws are a small diameter phillips head screw and the head of the screw kind of has a shoulder on it and that shoulder is about 3/16 of an inch long.

Thanks for the help.

Willie J