Re: Power brake and standard trans.
Posted by Craig Hendrickson On 2011/2/6 14:05:23
Howard,
Here's a (poor) picture of the underside of the 55 BTV brake pedal in one of my parts cars. I had to take the picture with the pedal still in the car because I did not want to tear up the firewall insulation to get the pivot out.
The dimensions are:
4.0in pedal width (including rubber)
1.0in from P-side outside edge to the closest pin stand
2.0in from D-side outside edge to closest pin stand
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=70346