Re: 1902 Model C Wire Wheel spokes

Posted by PackardV8 On 2011/3/6 14:14:49

I have no specific knowledge of a Packard wire wheel.
Typical wire wheel details involve a possibility of as many as 3 different spoke lengths.

IMPORTANT is to measure the hub offset to rim so that when it is relaced the hub will not be too close or too far from axle.

Need to measure the offset and record it regardless of WHO does the relace and trueing of the wheel.

KEEP ONE known good WHEEL as a pattern or model to compare the newly laced wheel to. OTherwise if there are problems then u're SOL for what is correct and not correct.