Re: A thread about threads......
Posted by Tim Cole On 2011/3/20 9:05:40
Dear kts68:
If memory serves me correctly what you need for this application are 10-32 X 3/8 inch chrome fillister head screws, nuts, and lockwashers.
You can use stainless steel and buff them to mirror finish.
Packard loved 10-32 fillister head screws.
Good luck with your Custom 8
PS: If 10-32 is too big then try 8-32. You can buy 1/2 length and cut them down to size.
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=72670