Re: Fuel Line wow's

Posted by HH56 On 2012/2/12 12:46:37

There is a picture of the internal structure provided by another member in post number 9 of this thread.https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=71383#forumpost71383. There is no screen and unless you cut your own, limited access is only thru the sender hole. The tube just enters tank, bends a couple of times and then opens straight down approx 1/8" above bottom of the triangular depression on the floor of tank. Sediment, varnish and some of the tank sloshing compounds hardening in that depression have been known to plug the opening. Pinholes have also been known to happen at the top of bend above the opening and again where the tube exits tank.

The fitting on the side of tank should be a flare with an inverted flare nut on the tubing threading into the outlet opening.

Attach file:

---

  (22.58 KB)