Re: new to packards and have a lot of questions please help
Posted by JWL On 2012/9/18 17:21:20
Quote:
HH56 wrote:...If manual brakes, pedal will go thru the floorboard. Master is located near the transmission hump slightly behind the accelerator pedal. Access is by pulling the carpet back and removing a plate covering it. Both use ordinary DOT3.
Howard, Ross changed the brakes on my 55 Clipper from BTV to conventional a non-boosted master cylinder. I believe he used pedal, linkage, and master cylinder from a 51-54 car. Anyway, the master cylinder is easily accessible from on top and can be seen from there too. It is below the steering column. They work great and no BTV worries.
Question: Is this location different than what Packard fitted originally to the non-power brake cars? Thanks.
(o[]o)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=110058