Re: 1941 Packard 110 - Column Shift Adjustment Help!
Posted by HH56 On 2014/6/5 15:07:39
Quote:
JW wrote:
Don't forget to oil the levers on the column. There is a small hole on the shaft just above the levers.
(o{}o)
And I believe the shift tube and lever setup is similar to the Clippers in as much as oil in the small hole does not do much in reaching the upper 2-3 lever unless some spilled while trying to get into the hole. Both levers need to be free to rotate on the shift tube. The upper lever has no direct lube point so is frequently dry. Place a few drops of oil at the top of lever so it can run down in the space between the lever and shift tube.
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=145048