1949 Standard ignition switch
Posted by Deskdriver On 2014/9/9 12:51:40
Just got my Packard a few weeks ago, there were no keys for it. Some previous owner rigged an on/off switch on the steering column. No idea how long that has been there.
After labeling the wires one by one and using the "Rigged" switch I removed the ignition to take to the locksmith. I slipped a nut and bolt through the wires so I could start the car and move it as needed.
Got the ignition switch and reinstalled it leaving the "Rigged" switch out. Now it doesn't start. My question;
Does the ignition switch go out on these cars? I have double checked my wiring and everything appears as it should except the "Rigged" switch is not in the loop.
Oh! another question just came to mind, would a "Rigged" switch require a change in some other place beside the ignition switch, as an example under the hood somewhere?
Should I just buy a new ignition?
Thanks for your help.
Barry
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=149720