Re: schematics
Posted by HH56 On 2014/9/23 17:25:40
If you mean only the motor, I don't believe anything other than the system schematic is in the archive. The motor uses the typical Packard reversible motor configuration. Two independent counter wound field coils in series with the armature. Only one of the field input terminals is active at a time.
I think you have a 56 so here is the complete schematic showing the inside of the control box and the motor. If you need a 55 schematic or want one with the optional manual up/down switch in the circuit I can post those too.
Attach file:
(76.54 KB)
I think you have a 56 so here is the complete schematic showing the inside of the control box and the motor. If you need a 55 schematic or want one with the optional manual up/down switch in the circuit I can post those too.
Attach file:
(76.54 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=150330