Re: Goddess of Speed Insert
Posted by Joe Santana On 2015/11/26 12:38:44
Hi,
I don't know if you can just buy the glass.
I had mine cut at a glass place. There should be no green edge. Use Pyrex. They made a pattern from a broken one. It's a little tricky getting the 9 striations perfect. I think they made 3 before they did it right. I gave the "mistakes" away already. Here are a couple pics, probably not helpful if you have a broken 1. You might check with David Flack (flackmaster) or David Moe (Packard Seattle Co.) for a "used one."
Attach file:
(96.88 KB)
(130.55 KB)
(111.83 KB)
I don't know if you can just buy the glass.
I had mine cut at a glass place. There should be no green edge. Use Pyrex. They made a pattern from a broken one. It's a little tricky getting the 9 striations perfect. I think they made 3 before they did it right. I gave the "mistakes" away already. Here are a couple pics, probably not helpful if you have a broken 1. You might check with David Flack (flackmaster) or David Moe (Packard Seattle Co.) for a "used one."
Attach file:
(96.88 KB)
(130.55 KB)
(111.83 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=169262