Re: How to rivet with solid rivets?

Posted by PackardV8 On 2008/11/23 10:24:20
Owens explanation is better. Go ahead and cold rivet the shhock link as long as it is not subject to any significant sheer or torsional stresses. It's difficult to tell from the pic what kind of forces are on the link or it's connstruction and i'm not familiar with this particular set up.

Unless originality is important for shows i would probably just use bolts.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=16739