Re: New member, setting off on a crazy adventure... PICS!!!
Posted by Joe Santana On 2017/12/1 12:43:36
The starter should not be difficult to remove. On my 40 it's 2 bolts and wiggle it out of the housing. It's heavy. Someone with a 54 could better advise.http://www.philbingroup.com/about_us.htm
Philbin electric 28 N Russell St Portland can rebuilt it. They just did my distributor and generator. I think you'd need to give them a week.
Someone near Salem may know of a closer place to Mollala for DC motor rebuilding.
Empire Battery is in Tigard south of Portland close to I-5 and in Salem. They have heavy duty commercial 6v batteries on the shelf at a reasonable price.http://www.empirebatteriesor.com
EDIT The 54 may require different dimensions than the ones I've bought at Empire. This one is 6-3/4" wide, 10" long and 7-3/4" high. But check with them for the size you need.
Attach file:
(203.11 KB)
Philbin electric 28 N Russell St Portland can rebuilt it. They just did my distributor and generator. I think you'd need to give them a week.
Someone near Salem may know of a closer place to Mollala for DC motor rebuilding.
Empire Battery is in Tigard south of Portland close to I-5 and in Salem. They have heavy duty commercial 6v batteries on the shelf at a reasonable price.http://www.empirebatteriesor.com
EDIT The 54 may require different dimensions than the ones I've bought at Empire. This one is 6-3/4" wide, 10" long and 7-3/4" high. But check with them for the size you need.
Attach file:
(203.11 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=198007