Re: fuel inlet filtting

Posted by Packardbarry On 2018/7/15 9:58:32

Might give one of these a shothttps://www.mcmaster.com/#steel-sealing-washers/=1dq3320

First type is NOT BUNA N so stay away from it. U need the B N for gas use.

BTW ive seen to many carbs broke at this inlet. Just me but i install a 3" hose (flex) at the carb inlet so there is not a strain on the carb. If u feel u need a inline filter do it at the fuel pump outlet or inlet with a modern-light filter.