Re: ultramatic transmission oil

Posted by Carl Madsen On 2009/6/5 23:23:32
There is no access cover on my 52 packard to gain access to the tranny dipstick. Even the manual says there is an access door there, on page 28 of the Ultramatic section of the service manual.

What a pain to pump fluid up and into the filler, I use a piece of clear tubing that I sneak up through the engine compartment, but I have to remove it each time to check the level. The manual shows that the Packard maintenance shops had a j-shaped filler on their pumps.

Additionally, how do I drain the converter - and then how do i fill the converter - the image below seems like the cover is removed and the oil drains through the flywheel.

Attach file:



jpg  (67.54 KB)
471_4a29ef44585be.jpg 567X598 px

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=30019