Re: water pump

Posted by Packard Newbie on 2021/5/15 1:18:03
Hi Topher,

Howard's advice is spot-on, as usual; I wanted to add that once you have supported the engine with some wood and a jack, and taken the weight off the mount, you can remove the 2 bolts inside the metal 'cup' that sandwiches the rubber cushions together (and attaches the mount to the motor), and then lift the engine a 1/4" or so more, to really get good access to the pump. This will also help with cleaning the gasket surface area, lining up the new gasket and ensuring the pump seats fairly. Chris

This Post was from: