Re: Rubber valve stems

Posted by d c On 2021/7/17 10:12:17

I was sent these by the tire supplier for the radials going on a 55 at the time. They were wrong for those rims. Did Packard have two sizes in 55? A running change ? They have an Argo # on bottom and a tr#. someone in an above post mentioned 5/8 or .625 size hole. What are the exact hole sizes because these measured with a dial caliper seem to be .590 at the sealing surface and would be loose in that hole. Is I understand it- tubeless stems need to be lubed up and pulled in the hole with a snug fit to create the seal. These are about 1 inch sealing surface to tip. I would donate to anyone who would pay shipping here in the US. I am not able to ship outside the continuous 48. Pics won’t seem to upload

Attach file:

---

  FED25EC6-B810-430C-BB07-70324587C3D5.jpeg (175.43 KB)