Re: changed frayed connection to oil sender in 22nd series Custom and now not working.

Posted by BigKev On 2021/10/31 17:00:10

Was it working before? I guess we need a bit more background and information. If wasn't working before then it could be a faulty sender or gauge. If it worked before, and now doesn't, I'd recheck your wiring or anything you disassembled to replace the wiring.

Either way a mutli-meter is your best tool to diagnose. Check sender to back of guage for continuity, that will tell you if the wiring is good. Ohm check the sender to ground. If it's open or short, then the sender is bad. OHM check guage to ground as well. It shouldn't be open or short either.