Re: Brake drum spring
Posted by Owen_Dyneto On 2021/12/29 16:03:18
That circumferential spring on the drum was used on the Packard-Bendix mechanical brake system beginning in 1933 and thru 1936 on the senior cars. The purpose was to reduce squeal (drum chatter) or resonance. The article below from the 1933/1934 Service Letters.
Note the dust shield which encloses the gap between the backing plate and the drum, another feature of this superior brake system. Similar to fuel pump heat shields, these often got discarded back in the day by mechanics saying that they weren't needed, making them no so easy to find today.
Attach file:
10th 11th series anti squeal springs.JPG (378.50 KB)
Note the dust shield which encloses the gap between the backing plate and the drum, another feature of this superior brake system. Similar to fuel pump heat shields, these often got discarded back in the day by mechanics saying that they weren't needed, making them no so easy to find today.
Attach file:
10th 11th series anti squeal springs.JPG (378.50 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=239955