Re: Ultramatic low no funciona

Posted by JeromeSolberg On 2022/2/15 21:43:35

Instructions for adjusting the bands are here:

Ultramatic Service Manual, Part 1

See Page 34. Torque the adjusting nuts to 20 ft-lbs, then back off 1 3/4 turns, then tighten the lock nuts (to 20 ft-lbs also from what I gather) (that's the way i read it, anyhow)

This is part of the larger collection:
Ultramatic Service Info

Also a nice diagram on Page 16 and instructions on page 37 here:
Ultramatic Serviceman's training manual