Re: Pulling an engine

Posted by JeromeSolberg On 2022/7/9 11:26:37
The 1951-54 manual transmission was essentially the same as the 1948 manual transmission, and there are some good photos in the 1951-54 service manual on this site, and in the 1951-54 Parts book. Look at both the section on the transmission and the section on the clutch.

But, essentially, you remove the 5 cap screws that attach the transmission to the clutch housing to remove the transmission (after having blocked it up, etc.). You don't remove the clutch housing itself.

1951-54 Service Manual

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=245741