Re: 356 timing sprocket damage

Posted by HH56 On 2022/8/28 17:26:45
As was mentioned before some have had real issues removing stuck valves and it sounds like you have joined the club. To remove them you will need to find or make something like this tool. If made, it will probably require something welded up that will fit under the valve. Anything that could be bent will not be strong enough. Use a regular body slide hammer for the other part. You may luck out and not damage the head with the tool but in all probability the valve will not fare well and will need replacing.

Attach file:


jpg  valve tool.jpg (174.88 KB)
209_630beb9baade7.jpg 1002X1366 px

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=247540