So, we got it all buttoned up last night. There will be an alignment required as the rear end seems to have shifted...once everything was reinstalled, the torque tube wasn't aligned anymore...which is a bit strange.
As a heads up, we did add a breather to the fill-plug and the shifter plate is not completely sealed all the way around to allow for pressure venting.
Thanks again to everyone for their help.
Attach file:
20231114_170953.jpg (376.12 KB)
20231114_171521.jpg (372.08 KB)
20231114_171731.jpg (282.88 KB)
20231114_171735.jpg (217.86 KB)
20231114_172632.jpg (265.97 KB)
20231114_173344.jpg (304.62 KB)
20231114_180216.jpg (367.23 KB)
20231114_183148.jpg (355.13 KB)
20231114_185934.jpg (268.47 KB)
20231114_185946.jpg (299.98 KB)
20231114_192359.jpg (361.49 KB)
20231114_194809.jpg (324.57 KB)
20231114_194815.jpg (340.51 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=264454