Re: Wiring harnesses

Posted by HH56 On 2022/12/16 20:29:19
Several good places have done repro harnesses with the fabric covered wire and/or fabric covered loom for members on this and the PAC forum but be aware a repro harness will be somewhat expensive. Wire used is modern so has a decent flexible vinyl type insulation but has the proper looking woven fabric with color tracers over that. Depending on what portion of harness you actually replace or any options in the car that might need extra wires or an additional auxilliary harness, expect to spend at least $1000 give or take if you need a complete car do over. You may not need to replace the body loom which runs over the headliner to the trunk but if you want to do it then the headliner will need to come out to access the loom and will probably not be reusable.

Rhode Island Wiring, YnZ Yesterday's Parts, Narragansett Reproductions, Potomac Packards are some of the major places who have done Packard harnesses. All have websites except Potomac. I believe you will probably need to give Potomac a phone call.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=251662