Re: Servo pressure hose 1955 packard patrician

Posted by HH56 On 2022/12/26 11:18:11
By your description of between servo and valveblock I think you are speaking of a Bendix Power Steering sytem and are asking about one of the two small hoses running between the control valve at the end of the pitman arm and the separate power cylinder unit attached between the frame and tie rod linkage. If so, Max Merritt has both of them. You can do a search on his website using the parts manual group number 15.621 where he lists them by actual part number as well as identifies them as the long or short hose. If you mean the pressure hose between the pump and the control valve on a Bendix system, that is also available but search for it under a different group number 15.849.

If your car has the Monroe single combined valve and power cylinder unit there will only be one pressure hose from the pump to the power assy and Merritt should have that hose as well.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=251936