Re: Wiperless!!!😮

Posted by HH56 On 2023/9/8 12:49:56

As Kev said, if there is good vacuum supply a rebuild is probably needed. On the off chance something is broken or not hooked up make sure the end of the cable is moving the slide valve on top of the wiper motor.

Looking at the motor from the front, as you turn the wiper on the valve should slide toward the passenger side. Turning back to off the valve should go toward the driver side and if you continue turning the knob a small amount against a slight spring pressure, the valve moves a bit more to the drivers side to connect a port on the end of the motor to vacuum. That port is for controlling the optional windshield washer.