Re: Front suspension

Posted by HH56 On 2023/9/15 16:59:22

There is a photo and some suggestions in reply to the post you made asking the question in the 41 shock absorber thread a couple of days ago.

Unscrew the hex head bolt that is closing the fill hole the arrow points to and have a funnel or tube small enough to go inside the hole. Use whatever to pour fluid in the funnel or get it thru the tube and fill to the bottom of the hole opening then replace the bolt. After filling and driving, if the shock was totally empty you may need to check it or add more. If the seals on the arms leak after filling you will need to replace the shock.