Re: 1951 Packard 300 Ultramatic dipstick location

Posted by HH56 On 2024/2/24 15:44:20

If you are looking for an opening to access and read the dipstick from the top there is none and you will need to crawl under. If after finding you need to add fluid that can be added from the top using a funnel placed into the breather opening. There is a plate covering a hole on the top flat surface of the transmission tunnel. The opening will be just in front of the seat when seat is all the way back. In most cases the carpet or mat can be pulled up and away from the passenger side to uncover the plate and then the screws holding the plate to the sheetmetal can be removed exposing the breather. In some cars the carpet might be under the sill plate or a couple of screws could have been added to hold it in position. Anything like that would need to be addressed before folding the carpet back.

If still stock, there is a dust cover crimped over the breather so the option to use if for filling is to release the crimps slightly to make the cap easy to lift off and then lift it and the mesh out of the breather or unscrew the breather assy from the case.

Be careful not to introduce any dirt or debris into the transmission when using the breather opening.