Re: Oil Pan drain plug
Posted by Randy Berger On 2007/1/9 22:08:57
Thanks Eric but that wouldn't help the existing hole which could leak. Perhaps that B&M kit is for more modern tranny pans that don't have any drain plug. They want you to drill a 1/2 inch hole. I already have a 5/8 hole. We successfully removed the bung in the rusty pan. It was only spot-welded two places on the top side of the bung. When I drop the good pan, we will remove that bung and weld in the good one. I'm going to look at my spare tranny - bet it has the same bung.
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=160