Re: Power brake and standard trans.
Posted by HH56 On 2011/1/19 14:01:38
Thanks JW, would appeciate it.
What I am trying to do is come up with a bracket and linkage anyone wanting to replace a BTV with a modern power unit can build or have built and use modern without the need for interior pedal changes and the obvious modified look.
This is one version (changed some since photo) of the concept. I have a distance of 3 3/4 inches on the left clear and am wondering if the clutch will fit in that space as is so the bracket could be used for those cars with BTV and standard shift.
If I could get a measurement of the distance clutch pedal entry into floor is from the kickpanel on the left and the height it is from the approx 45 degree angle where floor changes to toeboard, it would give me an idea if this will work with no further changes.
Attach file:
(49.98 KB)
What I am trying to do is come up with a bracket and linkage anyone wanting to replace a BTV with a modern power unit can build or have built and use modern without the need for interior pedal changes and the obvious modified look.
This is one version (changed some since photo) of the concept. I have a distance of 3 3/4 inches on the left clear and am wondering if the clutch will fit in that space as is so the bracket could be used for those cars with BTV and standard shift.
If I could get a measurement of the distance clutch pedal entry into floor is from the kickpanel on the left and the height it is from the approx 45 degree angle where floor changes to toeboard, it would give me an idea if this will work with no further changes.
Attach file:
(49.98 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=68982