Re: Cu-Ni vs. Steel for brake lines

Posted by Ken_P On 2011/6/25 11:07:46

Quote:

Rusty, thanks for the tip. I didn't have a tapered reamer, but I did have a 14 degree metal deburring tool for my die grinder that looks a whole lot like a small tapered reamer. I put it in my cordless drill for better slow speed control and it worked great. A file on top, taper the inside, and a combination of bench grinder, die grinder, and emery paper for the outer chamfer and I made four this morning with no do-overs.