Re: wiring a 1940 110 heater
Posted by Joe Santana On 2011/10/21 21:28:34
Probably don't need this, John.
Wiring instructions:
Red: Ignition switch to heater switch (Loose Feed)
Red: Heater Switch 1 to Heater Motor 1
Yellow: Heater Switch 2 to Heater Motor 2
Green: Heater Switch 3 to Heater Motor 3
Brown: Heater Motor Ground to Ground.
Attach file:
(45.72 KB)
Wiring instructions:
Red: Ignition switch to heater switch (Loose Feed)
Red: Heater Switch 1 to Heater Motor 1
Yellow: Heater Switch 2 to Heater Motor 2
Green: Heater Switch 3 to Heater Motor 3
Brown: Heater Motor Ground to Ground.
Attach file:
(45.72 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=88303