Bearing Strip
Posted by Lgace On 2021/2/4 21:57:40
I'm restoring my front grille, shutter assembly. With that, I acquired some of the drawing of several parts. I'm looking for any information for the material used for the bearing strip that holds the shutter blades. The part number #326557. The material on the drawing states "super lexide", 1/8" x 5/16" strips.
One of several bearing assemblies you will find in the parts book is #326567 (lower). For my car, there are two long strips on each side of the bottom and a long and a short on each side on the top. I have included a CAD drawing of the lower part. The brown material inside the other retainer is what I'm looking for.
Attach file:
bearingstrip.jpg (10.07 KB)
One of several bearing assemblies you will find in the parts book is #326567 (lower). For my car, there are two long strips on each side of the bottom and a long and a short on each side on the top. I have included a CAD drawing of the lower part. The brown material inside the other retainer is what I'm looking for.
Attach file:
bearingstrip.jpg (10.07 KB)This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=230088