Banjo Bolt for !930 733
Posted by Pckrd320 On 2022/4/18 12:09:52
I am missing what is called a "Banjo" bolt. It is part of the Bijur system and bolts to the back of the front backing plate. It would have hole drilled through it lengthwise and another through it crosswise near the top. With a copper washer on both sides it would pass through the "banjo" pictured on the right and allow the oil from the Bujur system to get to where it needs to go. I have added 2 photos: 1. shows a bolt in place.; 2. shows the broken off bolt and "banjo". I have heard these are available at NAPA, but I'm not sure that the Banjo Bolt they sell will fit. any leads or information would be great.
I would also appreciate any information on the availability of Bijur ferrules and drip plugs.
Thanks.
Gordon
Attach file:
IMG_3557.jpeg (204.40 KB) IMG_3673.jpeg (18.66 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=242911