1940 Commercial Wheels 16" 5x5.5" bolt pattern 3 7/8" center hole set of four
Posted by Larrys40s On 2022/12/7 12:43:09
Set of four 16" diameter commercial wheels for a 1940 era commercial Packard. Motor Wheel stamping on inside of wheel is 16F 550 572.
Note these are the 5 x 5.5" bolt pattern and they have the larger 3 7/8" center hole. To my knowledge they do not fit the standard passenger car hubs (much to my chagrin they certainly don't fit my 1940 160). I started stripping the paint and surface rust off them before discovering they don't fit are just in primer.
Asking what I paid $400 for all four plus shipping. Shipping will be extra. Can pick them up in Eurkea MO.
Attach file:
IMG_8218.JPG (311.22 KB)
IMG_8219.JPG (241.70 KB)
Note these are the 5 x 5.5" bolt pattern and they have the larger 3 7/8" center hole. To my knowledge they do not fit the standard passenger car hubs (much to my chagrin they certainly don't fit my 1940 160). I started stripping the paint and surface rust off them before discovering they don't fit are just in primer.
Asking what I paid $400 for all four plus shipping. Shipping will be extra. Can pick them up in Eurkea MO.
Attach file:
IMG_8218.JPG (311.22 KB)
IMG_8219.JPG (241.70 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=251236