Is there anyone here with a 1951-1954 SENIOR Henney-Packard parts car? I am looking for the adapter that goes between the transmission’s flange-type (Mechanics) yoke and the loop-type (Spicer) u-joint. Below shows the yoke along with a modern adapter so I expect the one for these cars resembles the modern one.
Before anyone points it out, I know I can use a Mechanics to Mechanics u-joint and the Packard Parts Book even shows one as a replacement for the front joint but I would prefer to use the proper original joint which was Mechanics on one side and Spicer on the other so that all three u-joints are the same.
I am not looking here for referrals as I’ve already contacted all known Henney suppliers so if you have one yourself, please let me know.
Attach file:
9AECA9DE-41A4-4607-A8EB-3296FB268B29.jpeg (155.30 KB) B74D2515-5679-4C6C-877F-7C64462D6C40.jpeg (5.75 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=256831