Wanted: 1937 Packard 120 master cylinder junction block

Posted by Ken_P On 2023/8/20 8:53:40

Looking for a junction block like pictured below. Has two 1/4" flare fittings.

Mine had been cross-threaded in past life, thought I could save it, but could not.

Will call Max or Kanter if I can't find one here, but I thought I would check here first.

Thanks!

Attach file:

---

  Failed master cylinder junction block.jpg (300.86 KB)


  Failed master cylinder junction block 2.jpg (287.88 KB)