Re: Collapsed skirts on used pistons
|
||||
---|---|---|---|---|
Home away from home
|
H.
One thought. Press needle bearings in pin holes in piston. Then use smaller pin. So you mean drop the center of pin bushing in rod down 80 thou..i would be willing to try it...but jack would know if that would fly.
Posted on: 2016/12/16 2:19
|
|||
Riki
|
||||
|
Re: Collapsed skirts on used pistons
|
||||
---|---|---|---|---|
Home away from home
|
Pin size.
Badger made them. I bought a set. But went wirh JE pistons. Cause 413 sit 80 thou below deck. But. With today's gas you can use 87 oct.
Posted on: 2016/12/15 7:12
|
|||
Riki
|
||||
|
Re: Electronic Ignition Conversions (General discussion)
|
||||
---|---|---|---|---|
Home away from home
|
55.56
I thought gm used the same cap points. Pontiac..buick. 56 cad?..
Posted on: 2016/11/19 3:09
|
|||
Riki
|
||||
|
Re: No more 374" pistons?
|
||||
---|---|---|---|---|
Home away from home
|
JE pistons few years ago it only was like 2 weeks and mine were done. I dropped off a piston and packard specs.
Posted on: 2016/11/19 2:50
|
|||
Riki
|
||||
|
Re: RIk's 56 ultramatic
|
||||
---|---|---|---|---|
Home away from home
|
My exhaust leak. The male part broke. So bored it. Put steel pipe in. Still want to make that part out of stainless steel. Or remove it.and have pipe made longer.
Posted on: 2016/11/16 0:27
|
|||
Riki
|
||||
|
steering gear
|
||||
---|---|---|---|---|
Home away from home
|
I bought this from a wrecking yard back in the 90s. Came off a 56 clipper
It took quite a hit to break that. Was wondering why arm was loose.
Posted on: 2016/11/14 17:28
|
|||
Riki
|
||||
|
Re: Spray-on sound deadener?
|
||||
---|---|---|---|---|
Home away from home
|
Thanks h.
I have used Hirsch..i find it better use the conveter stuff then Hirsch. Home depot has rustoleum rust converter. I used on my quarter panel spray can.
Posted on: 2016/11/11 23:36
|
|||
Riki
|
||||
|
Re: Spray-on sound deadener?
|
||||
---|---|---|---|---|
Home away from home
|
I would use rust converter first ..
Posted on: 2016/11/11 1:09
|
|||
Riki
|
||||
|
Re: Removing Lock Cylinder
|
||||
---|---|---|---|---|
Home away from home
|
check with pac sw.
Posted on: 2016/11/8 18:40
|
|||
Riki
|
||||
|