Re: A couple of T-L problems solved
|
||||
---|---|---|---|---|
Home away from home
|
Hot rod
Dpdr toggle switch...or seperate switch s leds to see up or down. .if you want
Posted on: 2013/10/14 11:17
|
|||
Riki
|
||||
|
Re: A couple of T-L problems solved
|
||||
---|---|---|---|---|
Home away from home
|
what about this?
Posted on: 2013/10/14 1:36
|
|||
Riki
|
||||
|
Re: A couple of T-L problems solved
|
||||
---|---|---|---|---|
Home away from home
|
12 years is a good run...that clicked off and on,, many times...
Posted on: 2013/10/13 22:04
|
|||
Riki
|
||||
|
Re: '56 Brakes
|
||||
---|---|---|---|---|
Home away from home
|
Jp,
enco here in the states, has brass round stock, 1-1/2, 6 feet 122.00 bucks. don't know what i would do with 6 feet, except model train wheels.! best thing is to wait for free shipping, Alum, would be cheaper to mail of coarse..
Posted on: 2013/10/12 17:21
|
|||
Riki
|
||||
|
Re: '56 Brakes
|
||||
---|---|---|---|---|
Home away from home
|
jp
the size for cap 1-1/4-18 thread. see about buying a bolt that size, in the US 15.00 bucks so i made my own see my blog for more pictures,,under riki's 56 ultra. i will make you one,, if you want. that air gap is gone, had to just lift off reservoir and let air out
Posted on: 2013/10/11 18:52
|
|||
Riki
|
||||
|
Re: Treadle Lightly
|
||||
---|---|---|---|---|
Home away from home
|
Pack Dave uk,,
no problem,, i have the alum, that was my first try, Ross gave me the size, 1-1/4-18 let me know,, v8 i did that with one cap, but this is to save org cap. you can get 1-1/4 -18 bolts too,, its an order thing, so i didn't go that route.
Posted on: 2013/10/11 10:54
|
|||
Riki
|
||||
|
Re: BigKev's 1954 Packard Clipper Deluxe Sedan
|
||||
---|---|---|---|---|
Home away from home
|
Posted on: 2013/10/7 20:41
|
|||
Riki
|
||||
|
Re: Treadle Lightly
|
||||
---|---|---|---|---|
Home away from home
|
ok.
after thinking about it, i think brass would be better. need to tighten that cap pretty tight so no leaks, if you guys can get your hands on cheap brass, 1-1/2 x 4 inches long. send it to me and i will make them up, and send back the brass i don;t use. and if you want to keep cap on,, brass will look better, i drill the center hole 7/16ths for 1/4 pipe fitting. i you send the brass, just make a donation to kevs site, we will call it sq.
Posted on: 2013/10/7 20:36
|
|||
Riki
|
||||
|
Re: Treadle Lightly
|
||||
---|---|---|---|---|
Home away from home
|
if anyone wants one of these to make bleeding the system a lot easy er, let me know,
need a tee, with a valve at cap to bleed air out, then put s clear container on fender and pump away, as to, Ross's system of bleeding. you can watch the fluid ,,so you don't run out. will make them out of alum. that stainless which is the picture, too, hard to work with. the cost is whatever its worth to you. turn around time depends on what i am into.
Posted on: 2013/10/7 1:56
|
|||
Riki
|
||||
|