Re: 1941 160 Gas tank question
|
||||
---|---|---|---|---|
Home away from home
|
I will give Razzi auto radiators a call monday Thanks again for the help .Also probably call kanter
Posted on: 2019/2/17 11:50
|
|||
|
Re: 1941 160 Gas tank question
|
||||
---|---|---|---|---|
Home away from home
|
Thanks for the replys
Posted on: 2019/1/20 14:43
|
|||
|
1941 160 Gas tank question
|
||||
---|---|---|---|---|
Home away from home
|
Dose anyone reproduce a gas tank for a 41 160 or is there a new tank from something else that will fit? Over the years I have tried boiling and coating tanks also sent them away and had it done. and after 10 or 15 years the coating starts coming off and you have to do it again. was hoping to install a new one.
Posted on: 2019/1/12 16:01
|
|||
|
Re: 1941 160 help identify front end parts
|
||||
---|---|---|---|---|
Home away from home
|
I have located a set of 1940 160 support rods for the fender mounts dose anyone know if they are the same as 1941 160.if Im reading the parts list correctly it says 1935 to 1941 are all the same number. but my thoughts are that the car design changed a lot in those years.
Posted on: 2018/12/29 4:09
|
|||
|
Re: 1941 160 help identify front end parts
|
||||
---|---|---|---|---|
Home away from home
|
Thank you for the photos and help. The bar that I have must be for a different year packard.The threads size in my Bar is 5/8 inch and the nut takes a 15/16 wrench on both ends. The largest bolt I can get in the bracket on the firewall and fender is 1/2 inch.It looks the same as what is pictured just larger I will try to add photos. its about 20 inchs long.I Guess the bad thing is I looked at the parts that I have And dont see any other bars like this and probably got lost from years of being apart.
Posted on: 2018/12/15 6:45
|
|||
|
Re: 1941 160 help identify front end parts
|
||||
---|---|---|---|---|
Home away from home
|
I thought it may have something to do with the wheel carrier in the fender but I tried to put it into the holes in the fender for the wheel carrier support and it is to large to go in to the holes. I dont know if theres away to get a picture but I tried to click on various things for that parts book and could not get a picture.
Posted on: 2018/12/11 11:19
|
|||
|
Re: 1941 160 help identify front end parts
|
||||
---|---|---|---|---|
Home away from home
|
the second picture is for the front bumperettes I checked the rear and those are on but the front bumper is apart and off the car so they must be for the front so that picture is solved. 1 down 2 to go
Posted on: 2018/12/10 10:33
|
|||
|
1941 160 help identify front end parts
|
||||
---|---|---|---|---|
Home away from home
|
I have over 30 parts for the front end that someone else removed. I figured out where most go. here is a few parts i dont know where they go
Posted on: 2018/12/9 2:50
|
|||
|
Re: 1941 Packard horn
|
||||
---|---|---|---|---|
Home away from home
|
Thanks I will try to clean contacts tomorrow the car dose not have alot of miles it just sat in a garage for along time they probably worked when it was parked
Posted on: 2018/11/10 15:24
|
|||
|