I thought it may have something to do with the wheel carrier in the fender but I tried to put it into the holes in the fender for the wheel carrier support and it is to large to go in to the holes. I dont know if theres away to get a picture but I tried to click on various things for that parts book and could not get a picture.

the second picture is for the front bumperettes I checked the rear and those are on but the front bumper is apart and off the car so they must be for the front so that picture is solved. 1 down 2 to go

I have over 30 parts for the front end that someone else removed. I figured out where most go. here is a few parts i dont know where they go

Attach file:

---

  (195.76 KB)


  (155.99 KB)


  (166.62 KB)

Thanks I will try to clean contacts tomorrow the car dose not have alot of miles it just sat in a garage for along time they probably worked when it was parked

I have tried to make the horns sound by hooking power and ground from battery to horns with jumper cables bypassing regulator and all it dose is make a sound like a click. The horns have been sitting a very long time. any secret to making them work. I have had others like this over the years and tried several things but could never get them to work.

Attach file:

---

  (218.88 KB)

The front end of the car from the firewall up was disassembled when i bought the car if you have any pictures of a car thats together please post them. I can probably figure it out its just easier with pictures.mainly need inner sheet metal pics.

Got the engine running again.The carb was flooding so I took that apart and freed up the float. It sounds surprisingly good and smooth .Let it run a while and most of the marvel mystery oil is burned out of the cylinders.The coil died about 10 minutes in when it was running put another one on that I had laying around and it fired back up.The oil pressure is 40 psi hot.And the radiator Did not run hot.It had an old atlas battery in it I will try to add a picture.The generator was not charging if you have any Ideas let me know. The guy that i bought this off of said his dad stopped working on the car in 1954 or 1955.The best thing about the car is it was inside a nice garage the entire time. Thanks again for the help

Attach file:

---

  (288.76 KB)


  (347.95 KB)


  (321.29 KB)

thanks for the help its ordered

The oil filter number on my old filter is 61-8711 made by Montgomery ward . I have tried to cross it on line but could not do it. Also the auto parts could not cross it. Thanks for any help.

Before starting the engine I was thinking of pressure feeding oil into the engine and putting oil down the cylinders and turning it by hand. I turned the engine about a quarter turn by hand and it seems a little stiff. the engine was supposed to be rebuilt and run but the restoration was never finished and its been sitting a long time. Should I do anything else?