2262 deluxe 8 condenser
|
||||
---|---|---|---|---|
Home away from home
|
Hi all, sorry quick clarification I couldn’t find readily on search. The condenser for a 2262-9 deluxe 8 sedan, there are two part numbers listed for the cross reference, I assume one is the custom and one is everyone else. AL-71 and AL-869, which is right?
Posted on: 2023/3/14 16:49
|
|||
|
Re: Various CL Pickings
|
||||
---|---|---|---|---|
Home away from home
|
That 48 is in my general area, if anyone wants to spot me the storage!
Posted on: 2022/9/26 8:47
|
|||
|
Re: Various CL Pickings
|
||||
---|---|---|---|---|
Home away from home
|
Not all water stains come from rain… but I sure wouldn’t pay more for that ;)
Posted on: 2022/5/14 18:21
|
|||
|
Re: Various CL Pickings
|
||||
---|---|---|---|---|
Home away from home
|
Not all water stains come from rain… but I sure wouldn’t pay more for that ;)
Posted on: 2022/5/14 18:21
|
|||
|
Re: Various CL Pickings
|
||||
---|---|---|---|---|
Home away from home
|
Sometimes it seems like all conversations here migrate back to side mounts…
Posted on: 2022/5/11 20:37
|
|||
|
Re: Various CL Pickings
|
||||
---|---|---|---|---|
Home away from home
|
Posted on: 2021/1/29 8:12
|
|||
|
Re: Various CL Parts Pickings
|
||||
---|---|---|---|---|
Home away from home
|
41 Packard Dash Clock $200
https://boston.craigslist.org/bmw/pts/d/norwood-1941-packard-dash-clock/7168661379.html
Posted on: 2020/8/14 17:19
|
|||
|
Re: Various CL Parts Pickings
|
||||
---|---|---|---|---|
Home away from home
|
50 Custom being parted out. Says he's keeping the body but not the front clip:
https://nh.craigslist.org/pts/d/hudson-1950-packard-23rd-series-custom/7157931051.html Now that I just posted that, I see it's listed as totally for sale too here: https://nh.craigslist.org/cto/d/hudson-1950-packard-23rd-series-custom-8/7161995001.html Seems like an abandoned rat rod project that never actually started.
Posted on: 2020/7/24 6:43
|
|||
|
Re: 49 22nd Deluxe Sedan Locks
|
||||
---|---|---|---|---|
Home away from home
|
Alright, she locks! The u joints worked, though I'd go a size up next time if I'd do it over again to eliminate the corner filing. I went with my thought above around u joint placement, ie close to the tumbler assembly, and there were no issues and also room for error also if something goes wrong cutting/grinding.
Unfortunately one of my eBay door locks the tumbler just pulls out pending what way I turn it. It locks and holds tight so I just have to be careful about that when I unlock I guess. Another issue is my passenger side lock is very temperamental in general. The key doesn't seem to have the torque to lock it, and the rubber end is too shallow to allow the locking tab to go far enough down to lock the car. So I can get it to lock with pliers to reach below the wood grain trim, but it also takes convincing. I'll have to open up the door again sometime I guess and maybe remove the whole lock assembly to see why it's not locking easily.
Posted on: 2020/7/19 16:54
|
|||
|