Re: 1930 boat tail speedster from a rough starting point
|
||||
---|---|---|---|---|
Home away from home
|
My wife spent the day at a baby shower... I got to spend the day in the shop. Finished shaping the top sheet for the tail and got it tacked on place. Hopefully tomorrow I'll finish welding and grinding.
Posted on: 2017/4/1 20:23
|
|||
1930 boat tail speedster
|
||||
|
Re: Motor rebuild questions
|
||||
---|---|---|---|---|
Home away from home
|
Alright guys I'm learning more and more about these motors as I read threads in this forum...
Today's question is can I use newer 320 rods that have shell bearings in my 7th series motor?
Posted on: 2017/3/30 5:48
|
|||
1930 boat tail speedster
|
||||
|
Re: 1930 boat tail speedster from a rough starting point
|
||||
---|---|---|---|---|
Home away from home
|
Back at it today! I really do love to vacation, but it also felt good to get back on the boat tail project.
Today I rolled the top sheet for the tail in the english wheel to get a nice crown on it. Five hours of work and I am getting close... maybe by next weekend I will have it tacked onto place. Gas tank gets a pipe thread in a custom disc welded to the bottom. Originally, it had an insert soldered in a hex that has formed into the bottom of the tank. The metal was thin and the threads where messed up. I melted the solder and removed the insert. Then I drilled the hole open to 1 1/2" diameter with a step drill. I will make a custom disc and tig weld it in before I use the POR15 tank coating system.
Posted on: 2017/3/26 18:32
|
|||
1930 boat tail speedster
|
||||
|
Re: 31 833 Oil Filter
|
||||
---|---|---|---|---|
Home away from home
|
I will be watching this thread because I'll be looking for a solution later this year for my 7th series
Posted on: 2017/3/24 15:34
|
|||
1930 boat tail speedster
|
||||
|
Re: Motor rebuild questions
|
||||
---|---|---|---|---|
Home away from home
|
Thanks Owen!
Engineering of these Packards is truly amazing!
Posted on: 2017/3/24 15:30
|
|||
1930 boat tail speedster
|
||||
|
Re: Motor rebuild questions
|
||||
---|---|---|---|---|
Home away from home
|
Ok guys here is more questions about my motor that will be an easy to answer...
Does the crank shaft have oil passages to provide pressurized lubrication to the main and rod bearings? Does the cam bearings get pressurized oil? How are the lifters lubricated? Thanks Mike
Posted on: 2017/3/23 11:05
|
|||
1930 boat tail speedster
|
||||
|
Re: Rear springs
|
||||
---|---|---|---|---|
Home away from home
|
There is a guy in southern Indiana who molds Teflon spring pads... he sells them on ebay. His requires a hole in the spring to keep it located.
Posted on: 2017/3/22 18:31
|
|||
1930 boat tail speedster
|
||||
|
Re: Motor rebuild questions
|
||||
---|---|---|---|---|
Home away from home
|
Hey Mr Pushbutton... what is Ed's contact info?
I did a quick google search and didn't find it For my Hemi build C&P in Ft Wayne did the machining Thanks! Mike
Posted on: 2017/3/22 9:28
|
|||
1930 boat tail speedster
|
||||
|
Re: 1930 boat tail speedster from a rough starting point
|
||||
---|---|---|---|---|
Home away from home
|
Hey guys it's my blog... I want in on that too!
Oh, and thanks for straightening me out
Posted on: 2017/3/22 9:11
|
|||
1930 boat tail speedster
|
||||
|