Dave
Does anyone reproduce the decals?

Dave,
So the generator scup is backwards?
Does the scupper get wrinkle paint also?
Thanks,
Richard

Attach file:

---

  (256.88 KB)

Dave, Question;
Is the starter and generator painted wrinkle finish on my 34?
As always thanks.
Richard

FYI;
Here was the problem, they had a chrome plated brass cap epoxied to the 2 3/4" threaded dome that had a 3/8" hex. Had to heat and epoxy let loose.
Could then unthread the inter dome. For the next owner I drilled out the cap so the hex will fit.
Richard

Attach file:

---

  (296.20 KB)

Dave,
Found the hex on the small one on the front bumper.
The problem now is the rear, tried small hex but nothing fit.
It is a one piece bumper.
Attached are some photos, the first is the bottom rear with the small hole.
Thanks,
Richard

Attach file:

---

  (176.21 KB)


  (188.42 KB)


  (196.71 KB)

I am trying to take the bumpers off my 34 that has outboard stabilizers.
My problem is I don't know how to get the chrome caps off the top and bottom. The front have small ones where the rear have large ones.
I see a small hole on the bottom but it looks like a drain.
Can someone tell me how to remove them?
As alway thanks.
Richard

I am the proud owner now, a beautiful car that was much better then what I thought. A few things need to be done, like what Dave suggested and some acorn nuts on the engine etc.
Richard

Yes it was confusing, what I was trying to say was on a three brush generator it would have a cutout regulator compared to an two brush generator using a full field voltage regulator.
See attached photo and you will see why I ask.
Richard

Attach file:

---

  (152.07 KB)

Dave,
Was the 34 voltage regulator a three brush cutout or a two brush regulator?
Thanks,
Richard

Does anyone make a replacement?

Richard